Signal Convertors
Providing you the best range of differential to single ended converters, differential to single ended converter, ttl to htl converter(rs422 to single ended converter or line driver to push pull signal converter) and htl to ttl converter (line driver to push pull converter or rs422 to single ended converter) with effective & timely delivery.
Differential To Single Ended Converters
Request Callback
₹ 2550 / Piece Get Latest Price
Product Brochure
| Usage/Application | Industrial |
| Phase | Single Phase |
| Current | MAX 1.6 mA |
| Input Voltage | 4-30VDC |
| Output Voltage | Depends on supply voltage |
| Mounting Type | Din Rail |
| Color | Green |
| Country of Origin | Made in India |
- Differential To Single Ended Converters (RS422 To Single Ended Converter or Encoder Level Shifter) :- This is TTL to HTL OR HTL to TTL converter or Differential to single ended converter or Single ended to differential converter. This module receives three differential signals viz A,-A, B,-B, Z,-Z signals (3-10 VDC or 10-28VDC peak To peak) and converts differential signal in to single ended signals viz A,B,Z. Pulse amplitude of output pulses is adjustable from 4.0VDC to 24VDC using a preset on board. In reverse way the module receives three single ended signals A,B,Z w.r.t. GND and converts the single ended signals in to differential signals as ( A,-A),( B,-B), and ( Z,-Z),the differential voltage is adjustable from 4.0VDC to 24VDC.Since the module can be used in both ways ,can be called as Universal Converter.
- DIN rail or IP65 box mounting type
- TTL/HTL signal selection by jumper for input signal
- Input signal in the range of 3-10 VDC or 12-28 VDC peak to peak
- Minimum driving current 1.6 mA
- Supply voltage 24VDC@300mA
- Output pulse amplitude adjustable from 4.0VDC to 24VDC by preset
- Input pulse frequency 1000Khz max
- Filters high frequency noise and gives clear square wave output
Differential To Single Ended Converter
Request Callback
₹ 650 / Piece Get Latest Price
Product Brochure
| Phase | Single Phase |
| Power | 24V AC/DC |
| Usage/Application | Industrial |
| Current | 10mA |
| Input Voltage | 5/10/24 VDC |
| Output Voltage | 3-65VDC |
| Mounting Type | DIN rail |
| Accuracy | Absolute |
| Weight | 150 grams |
Minimum order quantity: 2 Piece
Differential To Single Ended Converter (Low Frequency):-Function of differential to single ended signal converter: This module receives six differential
signals viz +A,-A,+B,-B,+Z,-Z signals (5-24 VDC) and converts differential signal in to single
ended signals with pulse amplitude equal to user supplied voltage anything between 65-2
VDC.Outputs are optically isolated from input encoder signals.
Features
• DIN rail mountable
• Three (A,B,Z) outputs module or Six (A,,B,B , Z,Z ) outputs module
• LED indication for output signals
• Reduces high frequency noise and gives clear square wave
• Sink type OR Source type outputs
Technical specifications:
Input signal voltage:3 VDC-30 VDC in 3 variants as 3-5V,6-12V & 12-30VDC
Max. input current:10 mA
Max. output voltage:65 VDC
Min.output voltage:3.0 VDC
Max. load per output point:50 mA
Continuous power dissipation at (or below) 25°C free-air temperature: 200mW
Input to output electrical isolation: 3.55 KV
Max. Voltage drop in output voltage: 0.5 V @ 5mA load
Resistance, input to output: 100 G
Max pulse frequency: 10 KHz
Applications:
a) For connecting simulated encoder signals from inverters/Servo drives to PLC inputs.
b) To convert RS422 signal in to single ended signal
c) To shift level of the square wave input to desired level
d) Conversion of sink type encoder to source type outputs
e) Conversion of source type encoder to sink type outputs
• Available in 3 points / 6 points output variants
• Converters with input signal other than 24VDC can be supplied on demand.
• Max. frequency :10 KHz.
Standards /Approvals
• CE Certified
• PCB :IEC61373
• Terminals:UL/CE
• Optoisolator:UL
• Profile & end plates : CE
NOTE:-Due to continuous product development the product supplied
to you may look different than the product image in the pdf file.
THIS PRODUCT IS NOT FOR EXPORTS
signals viz +A,-A,+B,-B,+Z,-Z signals (5-24 VDC) and converts differential signal in to single
ended signals with pulse amplitude equal to user supplied voltage anything between 65-2
VDC.Outputs are optically isolated from input encoder signals.
Features
• DIN rail mountable
• Three (A,B,Z) outputs module or Six (A,,B,B , Z,Z ) outputs module
• LED indication for output signals
• Reduces high frequency noise and gives clear square wave
• Sink type OR Source type outputs
Technical specifications:
Input signal voltage:3 VDC-30 VDC in 3 variants as 3-5V,6-12V & 12-30VDC
Max. input current:10 mA
Max. output voltage:65 VDC
Min.output voltage:3.0 VDC
Max. load per output point:50 mA
Continuous power dissipation at (or below) 25°C free-air temperature: 200mW
Input to output electrical isolation: 3.55 KV
Max. Voltage drop in output voltage: 0.5 V @ 5mA load
Resistance, input to output: 100 G
Max pulse frequency: 10 KHz
Applications:
a) For connecting simulated encoder signals from inverters/Servo drives to PLC inputs.
b) To convert RS422 signal in to single ended signal
c) To shift level of the square wave input to desired level
d) Conversion of sink type encoder to source type outputs
e) Conversion of source type encoder to sink type outputs
• Available in 3 points / 6 points output variants
• Converters with input signal other than 24VDC can be supplied on demand.
• Max. frequency :10 KHz.
Standards /Approvals
• CE Certified
• PCB :IEC61373
• Terminals:UL/CE
• Optoisolator:UL
• Profile & end plates : CE
NOTE:-Due to continuous product development the product supplied
to you may look different than the product image in the pdf file.
THIS PRODUCT IS NOT FOR EXPORTS
TTL To HTL Converter(RS422 To Single Ended Converter Or Line Driver To Push Pull Signal Converter)
Request Callback
₹ 2950 / Piece Get Latest Price
Product Brochure
| Input Voltage | 3-9V |
| Usage/Application | Industrial |
| Mounting Type | Horizontal |
| Current | max 1.6mA |
| Power | 24V AC/DC |
| Application | signal conversion from TTL to HTL |
Minimum order quantity: 2 Piece
TTL to HTL converter OR Universal Converter :- This is TTL to HTL OR HTL to TTL converter or Differential to single ended converter or Single ended to differential converter. This module receives three differential signals viz A,-A, B,-B, Z,-Z signals (3-10 VDC or 10-28VDC peak to peak) and converts differential signal in to single ended signals viz A,B,Z. Pulse amplitude of output pulses is adjustable from 4.0VDC to 24VDC using a preset on board.In reverse way the module receives three single ended signals A,B,Z w.r.t. GND and converts the single ended signals in to differential signals as ( A,-A),( B,-B), and ( Z,-Z), the differential voltage is adjustable from 4.0VDC to 24VDC. Since the module can be used in both ways, can be called as Universal Converter.
Main Features of the Module are :
Main Features of the Module are :
- DIN rail or IP65 box mounting type
- TTL/HTL signal selection by jumper for input signal
- Input signal in the range of 3-10 VDC or 12-28 VDC peak to peak
- Minimum driving current 1.6 mA
- Supply voltage 24VDC@300mA
- Output pulse amplitude adjustable from 4.0VDC to 24VDC by preset
- Input pulse frequency 1000Khz max
- Filters high frequency noise and gives clear square wave output
Htl To Ttl Converter (Line Driver To Push Pull Converter Or Rs422 To Single Ended Converter)
Request Callback
₹ 3250 / Piece Get Latest Price
Product Brochure
| Input Signal Type | Pulse |
| Output Signal Type | pulse |
| Input Voltage | 3-9V or 10-24V |
| Output Voltage | 3-24V |
| Mounting Type | Horizontal |
| Current | Less than 500mA |
| Phase | 24VDC |
| Accuracy | +/- 1 |
| Weight | 200GRAMS |
| Application | HTL to TTL signal conversion |
Minimum order quantity: 2 Piece
HTL to TTL converter OR Universal Converter :- This is TTL to HTL OR HTL to TTL converter or Differential to single ended converter or Single ended to differential converter. This module receives three differential signals viz A,-A, B,-B, Z,-Z signals (3-10 VDC or 10-28VDC peak to peak) and converts differential signal in to single ended signals viz A,B,Z. Pulse amplitude of output pulses is adjustable from 4.0VDC to 24VDC using a preset on board. In reverse way the module receives three single ended signals A,B,Z w.r.t. GND and converts the single ended signals in to differential signals as ( A,-A),( B,-B), and ( Z,-Z), the differential voltage is adjustable from 4.0VDC to 24VDC.Since the module can be used in both ways, can be called as Universal Converter.
Main Features of the Module are :
Main Features of the Module are :
- DIN rail or IP65 box mounting type
- TTL/HTL signal selection by jumper for input signal
- Input signal in the range of 3-10 VDC or 12-28 VDC peak to peak
- Minimum driving current 1.6 mA
- Supply voltage 24VDC@300mA
- Output pulse amplitude adjustable from 4.0VDC to 24VDC by preset
- Input pulse frequency 1000Khz max
- Filters high freqency noise and gives clear square wave output
X
Contact Us
Suhas Dharmadhikari (Proprietor)
Q- Log Controls And Systems
11, Sonai Heights, S.No. 6/9, Near Sant Savata Mali Temple, Bhumkar Nagar
Pune - 411041, Maharashtra, India
Send Email