Q- Log Controls And Systems

Encoder Signal Selector(Encoder Multiplexer Two To One or Analog Signal Selector):-This selector selects one incremental encoder between two incremental encoders.The two encoder used in the application should be signla compatible.The encoder signal selector can be used for saving cost of the project.Single servo/VFD drive can be used with two different motors.The feedback from the motor can be switched from motor 1 to motor2 by using encoder selector switch.In another application,a control system with two conveyors where only one conveyor is runs at a time.In this application you can use single encoder interface module in PLC by using encoder signal selector.Encoders used for conveyors are to be connected as Enc-1 and Enc-2 inputs.Output from Encoder selector switch is to be connected to PLC encoder interface module.

Encoder Splitter Multiple Outputs :- In applications where single encoder is to be connected to multiple devices/systems this is a ideal product. This product is in pair as Master and Slave.
Master card receives +A,-A,+B,-B pulses at master card and gives two set of outputs as +A1,-A1,+B1,-B1 and +A2,A2,+B2,-B2. For more outputs a slave card is to be connected to master card. The slave card gives two sets of outputs as +A3,-A3,+B3,-B3 and +A4,-A4,+B4,-B4. If still more outputs are required then second slave card can be added on first slave card. In this way maximum 16 output sets can be obtained from single master card provided the load current on the outputs is 10mA or less.