Q- Log Controls And Systems

DC Solid State Relay Board: This is a opto-Transistor with optical isolation between input
signal and output signal.This is to be used for switching 24V-60VDC supply by 5V-230 VDC
input signal.Standard DC inputs are 5V/10V/24V,other voltages on demand.
Features
1)DIN rail mountable, easy for troubleshooting.
2) Separate PCB for each point.So 1CH/2CH- -8CH/9CH- -15CH/16CH module can be supplied as per customer’s demand.
3) Sink or Source type input connectable
4) LED indication for input signal.
5) Ideal to drive hydraulic and pneumatic solenoid coils.
6) Built in free wheeling diode across driving load for every individual output point
Technical specifications:
Input signal voltage:3 VDC-100 VDC, Typical voltage is 24/10/5VDC
Max. input current:20 mA @24VDC
Max. output voltage:60 VDC
Min.output voltage:Supply voltage-4 VDC
Max. load per output point:6 Amps
Peak non repeatitive surge current:8 Amps
Input to output electrical isolation: 3.55 KV
Max. Voltage drop in output voltage: 2.5 V @ 2 Amp load
Switching ON/OFF delay:10 microseconds
Load type:Resistive and Inductive
Order Information & Dimensions:-
Sr.NO SSR Specifications          Order Code                      Dimensions
1        1 point ,Input:5V           QLOG-DCSSR-5-1P          26x125x60
2        2 point,Input:5V            QLOG-DCSSR-5-2P          51x125x60
3        3 point ,Input:5V           QLOG-DCSSR-5-3P          76x125x60
4        4 point,Input:10V          QLOG-DCSSR-10-4P      101x125x60
5        5 point,Input:24V          QLOG-DCSSR-24-5P      126x125x60
6        6 point,Input:24V          QLOG-DCSSR-24-6P      151x125x60
7        7 point ,Input:24V         QLOG-DCSSR-24-7P      176x125x60
8        8 point,Input:24V          QLOG-DCSSR-24-8P      201x125x60